Linear Stem Motion Type Pneumatic Diaphragm Actuators
6100 type adopts multi-spring diaphragm structure, its features include light weight, small volume, high performance and large output force.Working principle: The electric or pneumatic single from regulating instrument goes through the positioner and tran
Type: 6100 multi-spring diaphragm structure
Diaphragm material: EPR filled Nylon, NBR filled Nylon
Pushrod: 1Cr18Ni9
York: HT200, WCB, SS
Spring range: 20-100KPa, 40-200KPa, 80-240KPa
Air supply pressure: 140KPa, 160KPa, 280KPa, 400KPa
Air supply connetion : Rc1/4", NPT1/4"
Service temperature: -30~+70℃.
Acting type:
Positive action: Diaphragm air chamber supplies air to make pressure increasing, actuator pushrod moves down.
Reverse action: Diaphragm air chamber supplies air to make pressure increasing, actuator pushrod moves up.
Return difference: With positioner, <1% of total travel ,
without positioner, <3% of total travel
Deviation:
With positioner, <1% of total travel ,
Without positioner, <5% of total travel
Accessories: Positioner, filter regulator, limit switch, solenoid valve, lock valve, Pneumatic control valve, hand wheel etc.
Method of type designation
Serial No. |
610 |
Instruction |
|||
Membrane area |
1 |
Membrane area is 160cm2 |
|||
2 |
Membrane area is 310cm2 |
||||
3 |
Membrane area is 550cm2 |
||||
4 |
Membrane area is 950cm2 |
||||
5 |
Membrane area is 1600cm2 |
||||
Acting type |
D |
Positive action |
|||
R |
Reverse action |
||||
Manual operation |
T |
With top mounted handwheel |
|||
S |
With side mounted handwheel |
||||
Example: 6103D-S: Pneumatic diaphragm actuator, Membrane area is 550cm2, positive action, with side mounted handwheel. |